Audiosonic Caa-09169 Clock Radio Manual Work Patched 🎯 Ultimate

The alarm indicator light should now be visible on the display, signifying the alarm is active. Kmarthttps://www.kmart.com.au BIG DISPLAY ALARM CLOCK USER MANUAL - Kmart

Press the ALARM button again to toggle between "Buzz" (buzzer) or "Radio".

Setting the time is usually done while the unit is in (radio turned off). Audiosonic Caa-09169 Clock Radio Manual WORK

Fully unroll the FM wire antenna for clear reception.

While the digits are flashing, press the HOUR button to advance the hours. Ensure you check the PM indicator (usually a small light on the side of the display) to set the correct half of the day. The alarm indicator light should now be visible

Press the TIME SET button once more to confirm, or wait a few seconds for the display to stop flashing. Configuring the Alarms Most Audiosonic models feature dual alarms (AL1 and AL2).

In Standby, press and hold the ALARM 1 or ALARM 2 button. Fully unroll the FM wire antenna for clear reception

Open the battery compartment on the bottom to install a backup battery (typically a 9V or CR2032, depending on the revision). This ensures your settings are saved during a power outage. Setting the Clock Time

Press the MIN (Minute) button to reach the correct minutes.