Banlanx — App Manual

This usually indicates a power supply issue. Ensure your power adapter provides enough Amps for the length of your LED strip.

To begin, download the BanlanX app from the Apple App Store or Google Play Store. Ensure your smartphone’s Bluetooth is enabled and the LED controller is powered on before launching the app. Open the app and tap the "+" icon. The app will scan for nearby controllers. Select your device once it appears. Rename the device for easier identification. Hardware Calibration

BanlanX supports two types of music synchronization: banlanx app manual

Schedule your lights to turn on or off at specific times. You can also assign a specific mode to trigger at a certain time.

💡 If your lights are too bright for a bedroom, use the "Brightness" slider in the main menu to dim them down to 1% for a subtle ambient glow. This usually indicates a power supply issue

Higher-end controllers support a 3.5mm jack for direct audio input.

Enter the exact number of LEDs on your strip. Setting this too low will leave the end of the strip dark. Lighting Modes and Customization Ensure your smartphone’s Bluetooth is enabled and the

Verify the controller is getting enough voltage (usually 5V or 12V).

Go to "Settings" and change the RGB sequence (e.g., from RGB to GRB).