Bradex Bx60 Battery Charger Manual Full Extra Quality Official

For non-sealed batteries, remove cell caps and ensure liquid levels are at the recommended mark using distilled water. Clean the battery terminals of any corrosion. Do not plug the charger into the AC outlet yet . Connect the Red (+) clip to the positive battery terminal.

Check the fuse located on the base of the charger. If it is blown, replace it with a standard "flat" blade car-type fuse of the same rating.

Once the needle stops dropping for several hours or reaches zero, the battery is fully charged. bradex bx60 battery charger manual full

If the needle does not move when connected to a battery that is known to be flat, check the terminal connections for a firm, clean contact. If the battery is already fully charged, the needle may not move at all.

before removing the clips from the battery terminals. 3. Safety Warnings For non-sealed batteries, remove cell caps and ensure

Safeguards the unit if clamps are connected to the wrong terminals. Thermal overload: Shuts down if the transformer overheats.

Suitable for all 12V lead-acid car batteries. Safety Protections: Connect the Red (+) clip to the positive battery terminal

Avoid contact with battery acid. If acid touches skin or eyes, rinse immediately with cold water and seek medical advice. 4. Troubleshooting

To ensure safe and effective charging, follow these sequential steps: