Philosophy Features Journal Buy for Mac Account Get on Microsoft Store
The foobar2000 Alternative · For Windows 11

Carel Ritcusrg02 | Manual

The same bit-perfect audio, the same WASAPI exclusive output, the same FLAC and DSD support — delivered in an interface built after 2005, with every audiophile feature already inside.

Free from Microsoft Store Compare
N° I

What foobar2000 makes you install.

Auris includes these out of the box. No component packs, no DLLs, no forum threads from 2011.

Carel Ritcusrg02 | Manual

After modifying values with the arrows, you must press SET for at least 3 seconds to definitively save the new settings. If no button is pressed for 60 seconds, the device will exit without saving (timeout). Installation manual - Tempatron

Store and operate the device within the specified temperature and humidity limits to prevent internal condensation or damage to plastic components. 3. User Interface & Basic Operation

The controller features a bright and a simple keypad for adjustments. carel ritcusrg02 manual

Avoid installing probe cables near contactors or circuit breakers. If extension is needed, use cables with a minimum cross-section of 0.5 mm² .

By default, the display shows the temperature from the primary probe (B1). Changing the Set Point: Press the SET button briefly. Use the UP and DOWN arrows to adjust the desired value. Press SET again to confirm and save. After modifying values with the arrows, you must

The RITCUSRG02 is built for versatility in industrial refrigeration and climate control systems.

Monitors and controls temperatures from -50 °C to +150 °C . If extension is needed, use cables with a

Supports standard Carel NTC (10 kΩ at 25 °C) and PTC (985 Ω at 25 °C) probes.

Front panel protection is rated up to IP55 , making it suitable for environments with moderate moisture. 2. Installation Best Practices

Below is a guide to its primary functions, installation requirements, and programming steps based on official Carel documentation.

II
Correction

Parametric EQ & AutoEQ

foobar2000 needs the Equalizer component, Peace APO, or a parametric plugin stack. Auris ships with a true parametric equaliser and five thousand AutoEQ presets for headphones, ready to apply.

5,000+ Headphone profiles
III
Interface

A modern UI

foobar2000’s interface was modern in 2005. Auris is built for the way Windows looks and works today — dark theme, dynamic album art, keyboard-friendly, sensible defaults.

2026 Designed for
IV
Signal Path

WASAPI, without the component

foobar2000 requires the WASAPI Output Support component, selected per output device. Auris enables exclusive mode with a single toggle, and remembers it.

1 click Exclusive mode
V
Detection

BPM & Musical Key

In foobar2000 you install mp3tag, fb2k-tools, or an AcoustID plugin and configure scripts. Auris detects tempo and musical key of every track during library scanning — automatically.

Auto On scan
N° II

Auris vs foobar2000.

Feature by feature. Auris covers out of the box what foobar2000 asks you to assemble.

Faculty Auris foobar2000
DR MeterBuilt-inPlugin required
LUFS / ClippingBuilt-inPlugin required
Parametric EQBuilt-inPlugin required
AutoEQ profiles5,000+—
BPM DetectionBuilt-inPlugin required
Key DetectionBuilt-in—
WASAPI ExclusiveBuilt-inPlugin required
DSD SupportNativePlugin required
Modern UIYesCirca 2005
Setup TimeNoneHours
N° III

Questions, on switching.

After modifying values with the arrows, you must press SET for at least 3 seconds to definitively save the new settings. If no button is pressed for 60 seconds, the device will exit without saving (timeout). Installation manual - Tempatron

Store and operate the device within the specified temperature and humidity limits to prevent internal condensation or damage to plastic components. 3. User Interface & Basic Operation

The controller features a bright and a simple keypad for adjustments.

Avoid installing probe cables near contactors or circuit breakers. If extension is needed, use cables with a minimum cross-section of 0.5 mm² .

By default, the display shows the temperature from the primary probe (B1). Changing the Set Point: Press the SET button briefly. Use the UP and DOWN arrows to adjust the desired value. Press SET again to confirm and save.

The RITCUSRG02 is built for versatility in industrial refrigeration and climate control systems.

Monitors and controls temperatures from -50 °C to +150 °C .

Supports standard Carel NTC (10 kΩ at 25 °C) and PTC (985 Ω at 25 °C) probes.

Front panel protection is rated up to IP55 , making it suitable for environments with moderate moisture. 2. Installation Best Practices

Below is a guide to its primary functions, installation requirements, and programming steps based on official Carel documentation.

The audio you love,
without the plugins.

Install Auris in thirty seconds. Import your library. Listen.

Acquire on Microsoft Store

Paracausality Systems · 2026