Print Driver Repack — Chaser Che80

If the official site is down, look for the ESC/POS driver . Since the CHE80 uses standard Epson Emulation (ESC/POS), a universal 80mm thermal driver will often work perfectly. 3. Step-by-Step Installation Guide (Windows)

Whether you’ve just unboxed a new unit or you’re moving your POS system to a new computer, getting the driver right is the difference between seamless transactions and a frustrated queue of customers. 1. Why the Correct Driver Matters

Ensure the driver is set to 80mm x Receipt , not 58mm. Using the wrong size in the driver will cause the text to be squashed or misaligned. Conclusion

Installing the Chaser CHE80 is usually straightforward. Follow these steps for a clean setup: Step A: Physical Connection

Mastering the Chaser CHE80 Print Driver: A Complete Setup and Troubleshooting Guide

This is the most crucial part. Select USB001 (or the highest numbered USB port available). Step C: The Test Print

Many POS systems (like Loyverse or Square) provide "Generic 80mm" drivers that are compatible with the CHE80 chipset.

Under "Device Settings," you can toggle whether the printer cuts after every receipt or waits for a manual tear.

Always check the official Chaser or OEM portal first. Look for the "Support" or "Download" section.

If your text looks faint, you can increase the "Print Density" in the driver properties, though this may slightly slow down the printing speed. 5. Troubleshooting Common Issues