Commax Dpra01 Installation Manual Link Page

The DP-RA01 typically uses a connection. Cable Type: TIV 0.65mm or higher. Distance: Up to 100 meters (330 feet) using 0.65mm wire.

Ensure the handset is properly seated. If it continues, check if the volume pot on the side of the unit is set too high. commax dpra01 installation manual link

Connect these to the corresponding terminals on the outdoor unit (door camera) or the master room station. The DP-RA01 typically uses a connection

Check the terminal connections. Ensure the wires are stripped correctly and making contact with the metal plates inside the terminals. Ensure the handset is properly seated

The DP-RA01 is usually powered by the master unit or an AC 110V/220V source depending on the specific sub-model (Check the sticker on the back of your unit). 3. Mounting the Bracket

The DP-RA01 usually triggers a dry contact on the master unit. Check the wiring between the master station and the electric strike.