Deutsche Technologies Rv3 Digital Satellite Finder Manual 💯 Trusted

The RV3 is a high-sensitivity digital meter used to align satellite dishes for optimum reception. Unlike basic analog meters that simply "squeal," the RV3 provides a visual digital readout, an audible tone, and a backlit display, making it usable even in low-light conditions. High Sensitivity: Detects even weak satellite signals. Digital LCD Display: Shows signal strength as a percentage.

Always keep a high-quality 3-foot RG6 jumper cable in your RV kit specifically for the RV3.

Turn the knob until the LCD display shows a reading of roughly . deutsche technologies rv3 digital satellite finder manual

Connect the coaxial cable coming from your satellite receiver to the port on the RV3 marked "TO REC."

If the meter is "maxed out" at 99%, turn the sensitivity down so you can see movement. The RV3 is a high-sensitivity digital meter used

Check the connection to your receiver. The receiver must be turned on and the cable must be "live" to power the meter.

Slowly move your dish horizontally (azimuth). Watch the RV3 display: Digital LCD Display: Shows signal strength as a percentage

Before you start adjusting your dish, you need to "inline" the finder between your satellite dish (LNB) and your satellite receiver. Turn off your satellite receiver.

Your sensitivity is set too high. Turn the side dial counter-clockwise until the reading drops, then continue fine-tuning.