Connect the display console to the generator main cabinet.
Connect the emergency switch and assemble the tube cover. 3. Electrical and System Integration
The physical setup typically follows this sequence, as detailed in the GXR-SD Installation Guide : Raise the TS-FC2 or relevant tube stand. drgem x ray service manual install
Assemble the X-ray tube head and attach the collimator. Cable Connections: Connect the Up/Down switch and sensors.
Enter service mode on the control console to run the SDK software and diagnostics. Connect the display console to the generator main cabinet
Assemble the X-ray and DR I/O terminal blocks.
Once powered on, the system must be calibrated through the service mode: drgem x ray service manual install
Adjust LCD module contrast (CW for bright, CCW for dark). 5. Troubleshooting Common Installation Errors