If you need help with a specific part of the setup,I can provide the if you tell me your mobile carrier , or I can help you find the correct mobile app for your specific manufacturer.
Ensure the SIM card has data and the APN is set correctly. Check if the vehicle is in an underground garage where signals are blocked.
To track your vehicle in real-time via an app or website, you must configure the GPRS settings.
Send apn123456 [YourNetworkAPN] . (Check with your SIM provider for the correct APN name).
Connect to the negative terminal or vehicle chassis (-).
Most GT005 units use a default platform like Dyegoo or GPS588 . Send adminip123456 [ServerIP] [Port] .
Slide the SIM card into the slot (ensure the gold chips are facing down). Toggle the internal battery switch to "ON" (if applicable).
Disable the PIN code request using a mobile phone before inserting it into the tracker. 2. Device Setup Open the back cover of the GT005.
The LED indicators will begin to flash as the device searches for signals. 3. Wiring Configuration
You can control the GT005 by sending specific SMS codes from your smartphone to the SIM card number inside the tracker. SMS Command admin123456 [YourPhoneNumber] Check Location smslink123456 Google Maps Link Check Status param123456 Version, ID, IP, etc. Change Password password123456 [NewPassword] password ok Set APN apn123456 [APN Name] Reboot Device CQ system reset ok (Note: "123456" is the default factory password.) 🌐 Online Tracking Setup
If you need help with a specific part of the setup,I can provide the if you tell me your mobile carrier , or I can help you find the correct mobile app for your specific manufacturer.
Ensure the SIM card has data and the APN is set correctly. Check if the vehicle is in an underground garage where signals are blocked.
To track your vehicle in real-time via an app or website, you must configure the GPRS settings.
Send apn123456 [YourNetworkAPN] . (Check with your SIM provider for the correct APN name).
Connect to the negative terminal or vehicle chassis (-).
Most GT005 units use a default platform like Dyegoo or GPS588 . Send adminip123456 [ServerIP] [Port] .
Slide the SIM card into the slot (ensure the gold chips are facing down). Toggle the internal battery switch to "ON" (if applicable).
Disable the PIN code request using a mobile phone before inserting it into the tracker. 2. Device Setup Open the back cover of the GT005.
The LED indicators will begin to flash as the device searches for signals. 3. Wiring Configuration
You can control the GT005 by sending specific SMS codes from your smartphone to the SIM card number inside the tracker. SMS Command admin123456 [YourPhoneNumber] Check Location smslink123456 Google Maps Link Check Status param123456 Version, ID, IP, etc. Change Password password123456 [NewPassword] password ok Set APN apn123456 [APN Name] Reboot Device CQ system reset ok (Note: "123456" is the default factory password.) 🌐 Online Tracking Setup