Gx6605s S18069: V1 Dump File !!top!!

Many GX6605S boards have an RS232 port or a 3-pin/4-pin header on the board marked TX , RX , and GND .

Erase the chip, load the new GX6605S S18069 V1 dump file, and click "Write" or "Program". Verify the chip and reinstall/unclip it. Critical Warnings and Best Practices gx6605s s18069 v1 dump file

Open a GX6605S specialized loader tool (such as the Nationalchip GX6605S Downloader or GX Downloader III ). Many GX6605S boards have an RS232 port or

Connect the receiver to a PC using an RS232-to-USB cable (often requiring a CP2102 or CH340 converter). and GND . Erase the chip

Connect a CH341A programmer to the chip using an SOP8 test clip (or desolder the chip and place it in the programmer socket).