Known for having more stable BDM reading capabilities than some K-TAG clones.
If the menu is grayed out or the error persists across all protocols, the internal SD card may be the culprit. Carefully open the K-TAG unit and remove the SD card. Clean the contacts and reinsert it. hardware configuration not supported ktag
If using BDM, try soldering the boot pin directly instead of using a spring-loaded adapter to ensure the most stable connection possible. 3. Refresh the Internal SD Card Known for having more stable BDM reading capabilities
Always ensure your vehicle battery is supported by a stabilizer if you are reading/writing directly in the car, as any voltage dip can lead to a "bricked" ECU. Clean the contacts and reinsert it
Open the ECU and inspect the BDM pads. If the car was previously tuned or has water damage, these pads may be compromised.
Which and protocol were you trying to access when this error appeared? CarTechnoloGYhttps://www.cartechnology.co.uk HARDWARE NOT SUPPORTED: KTAG - CarTechnoloGY
If it still fails, some users recommend formatting a new card and reloading the K-TAG firmware files (specific to your version, like 7.020).