Hv3 Water Softener Installation Manual — Harvey

After installation, use a water hardness test kit on your kitchen tap. The reading should be . Note that your hot water cylinder may take several days to transition from hard to soft water as the existing scale begins to dissolve. Troubleshooting Tips

Maintain an air gap of at least 20mm between the end of the hose and the water level in the trap to prevent back-siphonage. The Overflow Line (Gravity Fed) Connect the overflow hose to the side of the cabinet.

Ensure there is enough room in front of the unit to load block salt. harvey hv3 water softener installation manual

This usually indicates a piece of debris is stuck in the internal valve. Turn the unit to bypass and contact a technician.

Connect the "Out" port to the pipe leading to your household taps. After installation, use a water hardness test kit

One for the inlet (to the softener), one for the outlet (from the softener), and a "bypass" valve in between.

Ensure the salt blocks are not "bridging" (stuck together). Always use high-quality Harvey Block Salt. Troubleshooting Tips Maintain an air gap of at

and drain the pipes by opening the lowest kitchen tap. Cut the pipe: Install the inlet and outlet tees.