Relays and dimmers are the workhorses of the system. In the Setup Tool 2:

Access individual channels to set "Power-on states."

Your PC must be on the same subnet as the HDL IP Gateway.

Manage your entire building from one laptop.

Assign the Subnet/Device ID of the light or appliance you want to control. 3. Configuring Output Devices

Check the 4-core Buspro cable. Ensure the DC24V and Ground lines are powered correctly.

If using IP, ensure your PC’s IP address is in a similar range to the gateway (default is often 192.168.1.xxx).

An HDL IP Gateway or a USB-to-Buspro interface.