Manual Repack: Hilger Watts Theodolite

A Complete Guide to Repacking a Hilger & Watts Theodolite for Safe Transport and Storage

Once the theodolite is placed on the base plate of the case, engage the locking clips. If your model uses a threaded center screw to hold the base, ensure it is snug but not overtightened. The goal is to prevent lateral shifting while allowing the rubber mounts to absorb vertical vibrations. hilger watts theodolite manual repack

Center the leveling foot screws so that the instrument sits at a mid-range height. A Complete Guide to Repacking a Hilger &

Most Hilger & Watts instruments originally came in a "bell-style" steel or aluminum alloy case. This design is distinctive because the instrument stands on its base while the outer shell drops over the top and clamps to the bottom plate. Inside, there are specific leather-padded or rubber-cushioned supports tailored to the dimensions of the telescope and the standards. Understanding these contact points is the first step to a successful repack. Pre-Packing Inspection and Cleaning Center the leveling foot screws so that the

Ensure the optical plummet eyepiece is tucked in or protected according to the case’s internal mold. Securing the Instrument