If you have misplaced your original USB key, the tool can be downloaded directly from official IBM support channels.
Wait 1–2 minutes. The canister will display two solid green lights and a . Once the amber light turns off, remove the USB key. Verify Success : ibm storwize v7000 initialization tool download
Complete Guide to Downloading and Using the IBM Storwize V7000 Initialization Tool If you have misplaced your original USB key,
Ensure the V7000 control enclosure is powered on and both node canisters show a and a flashing green light . Once the amber light turns off, remove the USB key
: The USB key must be formatted with a FAT32 , ext2 , or ext3 filesystem. Note that NTFS is not supported and will cause the initialization to fail as the V7000 will be unable to write the result files back to the drive.
After the initialization tool has completed its task, you can access the system's management interface: Connect your PC to the same management network.
To use the tool, you must prepare a standard USB flash drive.