Ivoclar Programat P100 Manual English May 2026

Turn on the power switch at the rear. The furnace performs a self-test before displaying the standby screen. Program Selection: Enter the desired Program Number ( ) using the keypad. Press START (

Connect the pump to the dedicated socket at the rear. It is highly recommended to use an original Ivoclar Vivadent vacuum pump to ensure compatibility with the furnace’s power consumption limits. ivoclar programat p100 manual english

or 62) to begin the firing cycle once the furnace reaches the standby temperature ( Turn on the power switch at the rear

Secure the heater plug by rotating it 45° until it snaps into place, and ensure the thermocouple plug is inserted with correct polarity. 2. Operating Procedures Press START ( Connect the pump to the

Place the unit on a flat, level surface away from heaters or other heat sources. Ensure at least 110 mm of space behind the furnace for the swivel movement of the furnace head and adequate air circulation. Connections:

Periodic calibration is essential as physical impacts and residue can cause slight shifts in temperature accuracy. Programat®

The P100 uses a numeric keypad for selecting and editing programs.