Jby6201 Manual Work [ Certified 2025 ]

Ensure the high-pressure hose is tightly connected to the machine and the spray gun.

Failure to clean the JBY6201 immediately after use is the most common cause of pump failure. jby6201 manual

Remove and clean the manifold filter (inside the machine) and the gun filter (inside the handle). Ensure the high-pressure hose is tightly connected to

Before pulling the trigger, it is vital to know the limits of your hardware: Typically 1100W – 1500W (model dependent). Max Pressure: 3300 PSI (22.7 MPa). Flow Rate: Approximately 2.0 to 2.5 Liters per minute. jby6201 manual

Check the fuse/breaker and ensure the voltage switch (if applicable) matches your power source.

Usually supports up to a 0.017" or 0.019" tip. 2. Initial Setup & Priming