For most JTE models, such as the , the control panel is used for initial configuration: Enter Programming: Press the PRGM key.
The JTE (Jintian Technology) series of inverters, including popular models like the , JT300 , and JT330 , are high-performance vector frequency converters designed for industrial automation and solar pumping systems. This guide provides a comprehensive overview of the essential steps for setup and maintenance as outlined in the official JTE Inverter Manual . 1. Safety and Installation Requirements Jte Inverter Manual
Install on metal or other non-flammable surfaces. Ensure the support can hold at least four times the inverter’s weight. For most JTE models, such as the ,
Proper wiring is vital for operational stability. Always disconnect input power before starting work. Standard Specifications (Typical 380V Models) AC 380V 3-phase (-15% to +10%) or 220V single-phase MPPT Range 450VDC–750VDC for 380VAC models Output Frequency 0–50Hz/60Hz Overload Capacity 150% for 1 minute; 180% for 10 seconds Key Wiring Rules: Proper wiring is vital for operational stability
Mount the unit vertically with at least 150mm of clearance above/below and 50mm on the sides for heat dissipation.
For safety, the inverter and motor must be well-grounded, as leakage current may exceed 3.5mA. 2. Wiring and Technical Specifications