: "Battery Low Trip" or "Battery SW/Breaker Open" alarms require checking the battery circuit breaker, which must often be closed manually. Manual Reset and Startup Procedure
: Flashing "Inverter OK" LEDs may signify an output overload, short circuit, or inverter over-temperature.
If your UPS is displaying an alarm, the first step is to identify the message on the LCD display . Common faults include: liebert hipulse d ups manual fix
If the UPS requires internal repair, you must manually transfer the load to maintenance bypass to ensure continuous power:
: Address the root cause (e.g., reduce the load if there was an "Output Overload" alarm). : "Battery Low Trip" or "Battery SW/Breaker Open"
: Use the push-button system control to navigate to the reset option after a recognized transfer. Cold Start/Restart : Ensure the input breaker is closed.
: "Input Single Phasing" or "Phase Reversal" often indicates a problem with the utility source or improper cable connections. Common faults include: If the UPS requires internal
To manually restore the system after a controlled transfer to bypass or an Emergency Power Off (EPO) action, follow these general steps: