Patched - Life Probo Pr70 Instructions For Installation Use And Maintenance Manual 10 Pages Work

Open the door to the desired height, position the opening stop against the carriage, and fix it in place. 3. Electrical Connections & Programming

For up-and-over doors, the APRB oscillating curved arm is mandatory for correct operation. 2. Mechanical Installation

The mechanical setup involves mounting the operator onto its guide rail (runner) and securing it to the garage structure. Open the door to the desired height, position

The installation area must have sufficient clearance for both maintenance work and the manual release cord.

Electrical work must be performed by a qualified technician. Electrical work must be performed by a qualified technician

Verify the garage door is mechanically sound, perfectly balanced, and moves smoothly without catching.

Before starting the installation, ensure the following conditions are met: loosen the clamping screws

Open the motor hatch, loosen the clamping screws, and remove the protective cap. Attach the operator to the runner using the provided omega-shaped support brackets and hexagonal-headed screws.