Qidi X-pro Manual -

Plug the power cord into the lower-left corner at the back and use the primary power switch to start the machine. Calibration and Bed Leveling

The X-Pro uses assisted manual leveling via its 4.3-inch touchscreen to ensure a flat printing surface. qidi x-pro manual

The dual extruder assembly must be manually secured with two screws (typically 2.5mm). Orient the nozzles so the fans face forward. Plug the power cord into the lower-left corner

Take out the protective foam and cut the plastic ties securing the extruders. Ensure you remove the belt fixing clips from both sides of the Y-axis. qidi x-pro manual

The X-Pro arrives nearly ready to use, though some critical assembly and removal of shipping materials are required.