Accessing the MenuPress and hold the 'SET' button for three seconds to enter the configuration menu. Use the arrow keys to navigate through the parameters.
Wiring and PowerEnsure the power supply is turned off before making connections.Connect the positive (+) and negative (-) leads to the designated power terminals.If using RS485 communication, ensure the A and B lines are correctly oriented to prevent data errors. Configuration and Programming
By following this user manual, you can maximize the reliability and accuracy of your RDU-A G2. For advanced integration or specific firmware updates, always refer to the latest manufacturer documentation. rdu-a g2 user manual
The RDU-A G2 is built for longevity, but regular maintenance ensures peak performance.
Setting the Input TypeThe G2 model supports various input signals (4-20mA, 0-10V, etc.). You must select the input type that matches your sensor to ensure correct scaling and readouts. Operating Modes Accessing the MenuPress and hold the 'SET' button
Physical MountingThe RDU-A G2 is designed for panel mounting.Cut a hole in your panel according to the dimensions specified in the technical drawing (typically 92x45mm).Slide the unit through the cutout from the front.Secure the unit using the side-mounting clips provided.
The RDU-A G2 is a high-performance Remote Display Unit designed for precision monitoring and system integration. Whether you are using it for industrial automation or specialized data visualization, this guide provides the essential information needed to get your device up and running efficiently. Overview of the RDU-A G2 Configuration and Programming By following this user manual,
Common Troubleshooting Tips:Display is Blank: Check power supply voltage and polarity.Erroneous Readings: Verify that the input scaling matches the sensor’s output range.No Communication: Check the baud rate and parity settings in the communication menu. Safety Precautions