S7-1200 Password Unlock -

Power on the CPU. The CPU will automatically transfer the "empty" state from the card to its internal memory, wiping the protected project and password.

Wait for the maintenance or RUN/STOP LEDs to finish flashing (usually the RUN/STOP LED will blink or stay solid STOP). S7-1200 Password Unlock

A Siemens-branded memory card (2MB or larger). Procedure: Power on the CPU

Insert the memory card into a PC and ensure it is empty. You may need to delete any existing .S7S files or folders from it. Power off the S7-1200 CPU. Insert the empty memory card into the CPU's card slot. A Siemens-branded memory card (2MB or larger)

If you can still communicate with the PLC (e.g., if only certain blocks are protected but you have enough access to go online), you can use the software tools within Siemens TIA Portal. SIEMENS S7-1200: Unlock PLC with forgotten password

If you have forgotten the password for a Siemens SIMATIC S7-1200 CPU, there is no official way to recover or "crack" the password while keeping the existing program intact. To regain access, you must typically , which will erase the internal load memory and the password-protected program. Method 1: Using a Siemens Memory Card (Empty Transfer Card)

Power off the CPU again and before restarting.