Skope Heated Towel Rail Timer Instructions [2021] (2026)

If you are going away, turn the unit off at the isolation switch or use the main wall control to save on electricity.

Pressing the button typically adds 1 hour of heating per press, up to a maximum of 5 hours.

Many Skope wall-mounted heaters and towel rails include a built-in countdown mode. This is ideal for drying towels after a shower without leaving the unit on all day. skope heated towel rail timer instructions

Disconnect the unit from power at the wall socket or isolating switch.

Operating a with a timer is the best way to enjoy warm, dry towels while keeping energy costs low. Skope units typically use one of two control methods: a built-in 3-hour timer mode or an external digital wall timer . 1. Built-in 3-Hour Timer Mode If you are going away, turn the unit

Reconnect the power while still holding the buttons, then release them.

Listen for the beeps: followed by a long beep indicate you have successfully entered 3-Hour Timer Mode . This is ideal for drying towels after a

A timer can save over $150 per year in running costs compared to leaving a standard 80W rail on 24/7.

Press and hold both the simultaneously.

For most digital models, a setting of 23°C is the recommended maximum for efficiency.