Techno Logic, Inc. テクノ・ロジック

有限会社テクノ・ロジック
 Techno Logic, Inc.
 沖縄市海邦２－９－２６
ﾂﾂﾂﾂﾂﾂﾂﾂﾂﾂﾂﾂﾂﾂﾂﾂ 〒904-2162
ﾂPhone: 098-923-3413
ﾂ F A X:ﾂ 098-923-3414

わ・だ・よ ねっと オンラインショップ CO2削減 E･COOL プロポリス
startimes software upgrade top

お問い合わせEmailアドレス
ﾂinfo@t-logic.jp

startimes software upgrade top

startimes software upgrade topﾂ SEGGER社製

J-Link ARM Pro is a refined version of the regular J-Link. It has an Ethernet interface in addition to the USB interface, as well as two additional LEDs which are used as hardware status indicators. It connects via Ethernet or USB to the Windows (2000/XP/Vista) PC host. J-Link ARM Pro is fully compatible with J-Link ARM and can be used "out-of-the-box". J-Link ARM Pro uses DHCP per default. The built-in webserver makes manual configuration easy and convenient. Ethernet allows using the emulator far away from the PC in a development or production environment; download and debugging speed is higher and Ethernet provides electrical isolation from the PC.

Features:

startimes software upgrade top Fully compatible to J-Link ARM
startimes software upgrade top Ethernet interface
startimes software upgrade top USB 2.0 interface
startimes software upgrade top Any ARMﾂｮ7/9/11, Cortex邃｢-M3 core supported, including thumb mode
startimes software upgrade top More memory for future firmware extensions (ARM11, X-Scale, Cortex R4, Cortex A8)
startimes software upgrade top Additional LEDs for power and RESET indication
startimes software upgrade top Comes with web interface for easy TCP/IP configuration (built-in webserver)
startimes software upgrade top Built-in GDB Server (planned to be implemented in the near future)
startimes software upgrade top Serial Wire Debug (SWD) supported
startimes software upgrade top Serial Wire Viewer (SWV) supported
startimes software upgrade top y
startimes software upgrade top Maximum JTAG speed 12 MHz
startimes software upgrade top Download speed up to 720 Kbytes/second * (higher download speeds will be available in the near future)
startimes software upgrade top DCC speed up to 800 Kbytes/second *
startimes software upgrade top Seamless integration into the IAR Embedded Workbenchﾂｮ IDE
startimes software upgrade top Powered through USB or power supply which comes with J-Link ARM Pro
startimes software upgrade top Support for adaptive clocking
startimes software upgrade top All JTAG signals can be monitored, target voltage can be measured
startimes software upgrade top Support for multiple devices
startimes software upgrade top Fully plug and play compatible
startimes software upgrade top Standard 20-pin JTAG connector
startimes software upgrade top Wide target voltage range: 1.2V - 3.3V, 5V tolerant
startimes software upgrade top USB and 20-pin ribbon cable included
startimes software upgrade top Memory viewer (J-Mem) included
startimes software upgrade top Comes with licenses for: J-Link ARM RDI, J-Link ARM FlashBP, J-Link ARM FlashDL, J-Link ARM GDB Server, J-Flash ARM
startimes software upgrade top Software Developer Kit (SDK) available
startimes software upgrade top Embedded Trace Buffer (ETB) support
startimes software upgrade top Adapter for 5V JTAG targets available
startimes software upgrade top 14-pin JTAG adapter available
startimes software upgrade top Galvanic isolation from host system via Ethernet
startimes software upgrade top Optical isolation adapter available
startimes software upgrade top Target power supply: J-Link can supply up to 300 mA to target with overload protection.

* = Measured with J-Link ARM Pro Rev. 1, ARM7 @ 50 MHz, 12MHz JTAG speed.

 startimes software upgrade top

　

Startimes Software Upgrade Top [verified] May 2026

: You must download the specific firmware file for your exact model (e.g., Master Plus) onto a clean USB drive. Installation : Insert the USB into the decoder port. Go to Menu > Settings or External Devices . Select File Manager and locate the software file (.bin).

: Plug the power back in. The decoder will typically show a "Software Update" prompt within a few seconds. startimes software upgrade top

Most StarTimes decoders are designed to update automatically when a new version is released. : You must download the specific firmware file

If the automatic prompt does not appear, you can check for updates through the settings. Press the button on your remote. Navigate to Settings and press OK. Look for Decoder Information or System Settings . Select File Manager and locate the software file (

Press to begin. The decoder will show "Successful" and reboot upon completion. Troubleshooting Common Upgrade Issues

Select (if available) to scan for the latest broadcast-delivered firmware. 3. USB Software Upgrade (Advanced)

There are two primary ways to upgrade your decoder: automatically (via the broadcast signal) or manually (using a USB drive or via the menu). 1. Over-the-Air (OTA) Automatic Update

　

startimes software upgrade top
startimes software upgrade topstartimes software upgrade top
ﾂﾂﾂﾂﾂﾂﾂﾂﾂﾂﾂﾂﾂﾂﾂﾂﾂﾂﾂﾂﾂﾂﾂﾂﾂﾂﾂﾂﾂ ﾂﾂﾂﾂﾂﾂﾂ オンラインショップﾂﾂ "MEDIC ReCell 再生美容液ﾂ CO2削減 省エネ対応ﾂ E･COOL CCFL（冷陰極管蛍光ランプ）蛍光管 照明 ZENシリーズ" "ブラジル産 プロポリス液" 災害時用・非常用トイレﾂ ほっ！トイレﾂ ホワイトレットﾂ パウダレットﾂ 【Zylin ZY1000 ARM7, ARM9, ARM11, XScale, Cortex JTAG Debugger】 『ＳＥＧＧＥＲ J-Link ARM/J-Flash ARM』ﾂﾂ 『RONETIXﾂ PEEDIﾂ BDM/JTAG Emulator』ﾂ 是非ご訪問下さいませ ﾂ
この Web サイトに関するお問い合わせやご意見などについては、info@t-logic.jp まで電子メールでお送りください。
ﾂｩ2003-2015 Techno Logic, Inc.