: Do not disconnect the cable or power down until the progress reaches 100% and a "Completed" message appears. Common Troubleshooting
: Ensure you are using the correct chipset setting for your specific receiver hardware.
: Connect the RS232 cable to the PC and the satellite receiver. Keep the receiver powered OFF at the start. Software Configuration : Open the Sunplus Loader Tool. sunplus loader tool full
: This often occurs if the baud rate is incorrect or if the receiver was powered on before clicking "Start."
Set the (typically 115200) and choose the appropriate chipset (e.g., 1506T). : Do not disconnect the cable or power
: Click the Start button in the loader software.
: Click the "Open" or "Folder" icon to browse and select your firmware .bin file. Keep the receiver powered OFF at the start
To use the tool effectively, you generally need the following hardware:
: Allows users to select specific DDR types (DDR2 or DDR3) to match the hardware specifications of their receiver.
