Tgc Bc-90-1h Manual -

Use the arrow buttons to reach your desired heat. For safety, the system typically won't allow temperature changes while water is actually flowing at high temperatures.

Always check the water temperature with your hand before stepping into the shower.

If the priority light is not on, press the [Priority] button. You cannot change settings unless the priority light on your specific remote is lit. tgc bc-90-1h manual

Displays the status of the heater. It often turns from green (standby) to orange or yellow when the burner is active.

A red light illuminates when the temperature is set to 50°C or higher as a warning to prevent scalding. Use the arrow buttons to reach your desired heat

Simply turn on your shower or faucet. The heater will ignite automatically. Safety and Maintenance

The BC-90-1H interface is designed for simplicity and safety, featuring several key buttons and indicators: If the priority light is not on, press the [Priority] button

The BC-90-1H is a wired unit. If the screen is blank, ensure the main power to the water heater is on.

Used to activate or shut down the water heater.