Thyssenkrupp Levant Stair Lift Installation Manual Full Patched < LIMITED >

The Levant is designed for straight indoor staircases only.

This guide serves as a comprehensive overview of the installation process, mirroring the technical specifications found in the official installation manual. 1. Pre-Installation Checklist

The Levant uses a dry-rail system. Do not apply grease to the rail; instead, keep it clean and free of dust. thyssenkrupp levant stair lift installation manual full

A standard 110V AC outlet must be available near the top or bottom of the stairs to plug in the battery charger. Tools Required: Power drill with masonry or wood bits. Socket wrench set (13mm and 17mm are common). Allen key set. Spirit level and tape measure. 2. Component Overview Your Levant shipment should include: The Drive Unit (Chassis): The motor and battery housing. The Chair: Including the seat, armrests, and footrest. The Rail Sections: Usually two or three aluminum segments.

Constant beeping usually indicates the lift is not parked on a charging point. The Levant is designed for straight indoor staircases only

Allow the unit to charge for at least 4–6 hours before the first full-weight test.

Use a spirit level to ensure the rail is consistent. Tools Required: Power drill with masonry or wood bits

Ensure the copper charging strips at the top and bottom of the rail are clean and aligned with the "brushes" on the drive unit.